For those who are interested in the question of how to convert square meters into linear meters, our specialists will give a definite answer. No way. Why? To understand this, you need to know the features of each of these units of measurement. And what should you do if you need to translate them? This will be discussed in this article.
"Meter" and its functions
The word “meter” is of Greek origin and translated from this language means “measure”. Even at school we are given knowledge about it. Firstly, this is the length of the path. Secondly, it corresponds to the distance that sunlight travels in a vacuum in 1/299792458 seconds. This unit of measurement appeared back in the 17th century, it was then that the decision was made to create a generally accepted and universally used measure of distance, which is based on natural natural phenomena, which do not depend on the desires of people.
So, in France in 1791 it was correlated with the length of the Paris meridian. This was determined on the basis of geodetic and astronomical measurements made by scientists such as Delambre and Mechain. Based on these parameters, a standard for measuring it was also made. This sample was a ruler made of platinum, the distance between the ends of which was equal to the chosen length. But it turned out that this value is not accurate, so the meter was equated with other various quantities - in 1799, 1899, 1927, 1960. The last and final designation of the meter as a unit of measurement was established in 1983.
It turns out that the meter that is widely known and used in everyday life can be different:
- square;
- linear
And how these measures of measurement differ from each other, and how to transfer them from one to another, we will find out by considering the features of each of them separately.
Features of a linear meter
The very phrase “linear meter” is incorrect, because the most ordinary meter will be just that. This measure is established to determine the linear length of something. That is, it would be correct to say: the linear length of something is 1 meter. This means that one linear meter is a measure of the length of something, without the influence of other units of measurement, such as width, height, mass, etc.
The linear meter designation is most often used in the construction industry. So, in these measurement units you need to measure:
- materials that can be rolled (for example, fabrics or linoleum);
- hard materials (board, pipes or fittings);
- furniture sets (kitchen or bedroom sets).
In this case, the width of the material is included in its cost immediately before it is converted to length. Let's consider this feature using the example of rolled material. So, the fabric in a roll corresponds to 2.2 m (this is 220 cm), which means that a linear length of one unit will have a width in the digital value of 2.2, which corresponds to an area of 2.2 square meters.
Any length can be measured with such a generally accepted measure. This procedure is performed using a regular ruler, tape measure or some other measuring tool designed for these purposes. Moreover, this unit of measurement corresponds to other measures that are also suitable for measuring the length of something:
- 1000 millimeters.
- 100 centimeters.
- 10 decimeters.
Most often in everyday work it is customary to use the meter, and not the units of measurement that are included in it.
Features of a square meter
Unlike the linear square meter as much as the area, that is, directly depends on such a value as width. The International SI (system of units of measurement) clarifies this concept: a square meter corresponds to the area of a square with a side of one unit of measurement - 1 m. This measure was created specifically for measuring the areas of any surfaces, it is customary to denote:
- area of apartments, premises;
- quantity building materials(for example, facing or flooring);
- measuring surfaces to be processed with something.
Is it possible to convert square meters to linear meters (with comments and examples)
A situation often occurs when, when measuring a material, it is necessary to convert square meters into linear meters. But for this you need to know:
- The length that corresponds to the linear unit of measurement.
- Width, which is also represented by the same unit.
Let's look at a specific example: 12 square meters of linoleum need to be laid on the kitchen floor. On sale this material is measured only in linear units. Therefore, you need to know the width of the required linoleum, which corresponds to 2.5, 3 or 4 meters.
In this particular case, experts advise: purchase 4 m of linoleum with a width equal to 3 m or 3 m with a width of 4 m. This is explained by the following calculations:
- first calculation option: 4 (length) × 3 (roll width) = 12 square meters;
- second calculation option: 3 (length) × 4 (roll width) = 12 square meters.
In this particular case, 12 square meters corresponds to three or four ordinary meters. But these calculations are not scientific because they are made, as they say, by eye.
Another example that will help convert the usual meter length into area squares.
To do this, let's make calculations with kitchen furniture: the kitchen set has a length of 2.5 ordinary meters. We need to calculate the floor area that the kitchen set will occupy in the kitchen. To do this, we perform several mathematical operations:
- Multiply the length 2.5 m by the width of the kitchen wall 0.6 m.
- We get the result - 1.5 square meters.
It is this digital indicator that will correspond to the area that kitchen furniture will occupy in the kitchen.
The third example will concern calculations related to finishing materials. To finish the bath, you need to purchase 65 square meters of wooden boards. In a hardware store, this material is sold in 3-meter lengths with a cost per linear meter. That is, it is necessary to calculate how many ordinary meters of wooden boards are required for an area of 65 square meters. We perform mathematical operations:
- We specify the dimensions of the board: 300 cm × 10 cm × 0.5 cm (this corresponds to a size in meters of 3 × 0.1 × 0.005).
- We multiply the length by the width in the required unit of measurement (in our case, meters).
- We get the area of one board: 3 × 0.1 = 0.3 square meters.
- We calculate how many boards are needed for 65 square meters, that is, divide 65 by the area of 1 board: 65: 0.3 = 216.67, or 217 boards.
Very often, inexperienced or novice builders do not know how to correctly calculate a linear meter. This concept is used when performing various construction and repair work, as well as when purchasing cabinet furniture and in some other cases.
If we talk about this concept, then it is practically no different from the concept of length, it just does not take into account the width of the material.
In many cases the width flooring or certain products is a standard value and in order to calculate a linear meter they do not need to be taken into account, thus the calculation process is significantly simplified.
Features of flooring calculations
Fig.1 Measuring tool
In order not to forget the results obtained, it is best to record them, for example, on paper and you can go to the store. There you can decide for yourself or ask a sales consultant for help. If, for example, the width of the corridor is 2 m or a little more, and its length is 4 m, then you need to purchase 4 lm. linoleum, which has a width of 2 m.
If suddenly the store does not have a coating of this width, then you can purchase 2 l.m. linoleum 4 m wide, but then you will have to cut it in half and have to cover it in two pieces.
Take measurements carefully so as not to make mistakes in your calculations. If you cannot correctly calculate the linear meter of building material, then it will be impossible to return it back, so it is better to buy with a small margin.
The store usually indicates the price per linear meter, regardless of the width of the material. Thus, it is much easier to carry out calculations and determine the price of the required amount of coverage.
If when laying linoleum it is allowed to join the material, then when laying carpet it is not recommended to make joints and therefore, when purchasing it, you need to look for one that will correspond to the width of your room and purchase the required number of linear meters.
Fig.2 Floor covering
The price of the material will be directly proportional to its width; the higher it is, the higher the price will be.
To determine the amount you will need to pay, you need to multiply the resulting number of linear meters. for the cost of one l.m. purchased material.
Calculation for cabinet furniture
You also need it if you buy ready-made furniture in a store; with its help you can decide on the required number of bedside tables and other elements of the set.
Cost of p.m. furniture will depend on the material from which it is made, the fittings used, sizes, and design.
Fig.4 Kitchen set
After that, knowing what length of furniture you need, you can multiply the resulting number by the number of meters and thus get the price of furniture for your room.
Keep in mind that the price of a kitchen set does not include the cost of a sink or hob; sellers often include it in the cost of p.m. does not include the price of handles and other accessories.
This is why sometimes you have to finished product to pay more than was stated, before purchasing you need to ask the seller about the cost of the goods and discuss all the nuances.
Linear meters are considered to be a large number of building materials, for example, various pipes, cornices and other materials that require joining with each other. Metal fencing for the fence is also measured with these parameters.
If when buying a floor covering there are usually no problems, then in order to buy, for example, film for a greenhouse, you need to accurately measure not only its roof, but also the walls that will be covered with film and only then proceed to calculations.
As you can see, there is nothing scary or incomprehensible in such a term as a linear meter.
In order not to make a mistake when purchasing, you must come to the store with ready-made plan premises and if something doesn’t work out for you, then a sales consultant will be able to help you.
As you know, their services are not cheap, and by doing all the calculations yourself, you can save some money.
The correct answer is No, because a square meter and a linear meter are units of measurement of different categories. Square meters measure the surface area, and linear meters measure only the length of the product.
Below we will analyze the concepts of square and linear meters
Square meter (sq.m; m2) V International system units (SI) is the area of a square whose side is 1 meter. Square meters measure the surface area of walls, floors, real estate objects, where the area, for example, of an office or apartment is equal to the floor area. Or if you need to calculate the quantity ceramic tiles on a wall or linoleum on a floor, you need to multiply the length by the height and get the surface area in square meters. Although linoleum itself is sold in linear meters, more on that below.
Designations in square meters (m2) are used in...
- Measuring buildings, houses, apartments, premises;
- Measurement of facing and flooring materials;
- Measuring the covering surfaces of roofs and floors;
- Measuring the area occupied by equipment and furniture
The concept of a linear meter
It is IMPOSSIBLE to convert square meters into linear meters and simply into meters!
Linear meter (roll material, product, fence, furniture)– this is the length independent of the width. Since the price of the material is included in the cost of 1 linear meter of carpet, linoleum or lining. A linear meter of linoleum 3 meters wide will naturally be more expensive than linoleum 2.5 meters wide.
Sometimes, in the manufacture of kitchen furniture, linear meters are also used for ease of calculation. For example, the manufacturer considered that kitchen cabinet 3 meters long and 60 centimeters wide with the required number of shelves, drawers, and doors will cost $1,200 at the National Bank exchange rate. And as you know, the kitchens in our apartments are different, mostly small, so the manufacturer sets the price for 1 linear meter at $400. The customer can only fit 2.5 meters. The standard equipment, placement of shelves, drawers are discussed and the price is $1000.
$400 x 2.5m = $1000
Designations in linear meters are used to measure:
- Flooring roll materials(roll of fabric, carpeting, linoleum...);
- Boards, linings, block houses, plinths, sometimes pipes, fittings;
- Cost is the price of furniture (kitchen) with standard equipment and fittings.
How to calculate linear meters into square meters and vice versa
Example 1
To convert square meters into linear meters, you need to know the length and width of the product (material) that is sold in linear meters.
We need to lay 12 m2 of linoleum in the kitchen, but in the store they sell it by linear meters, but with a width of 2.5 m, 3 m or 4 meters. It would be better to buy 4 linear meters of linoleum 3 meters wide or 3 linear meters 4 meters wide:
4m (length) x 3m (roll width) = 12 square meters
3m (length) x 4m (roll width) = 12 square meters
In this particular case, 12 square meters is equal to 3 or 4 linear meters, but this cannot be considered because the width must always be taken into account.
Example 2
Let's take the same example with kitchen furniture of 2.5 linear meters. We need to know the floor area that our kitchen furniture covers. To do this, we multiply the length of 2.5 m by the width of the kitchen wall 0.6 meters, and we get 1.5 square meters - this is the area occupied by our furniture in the kitchen.
Example 3
To finish the bath we need to buy 65 m2 of lining. It is sold in 3-meter lengths at a price per linear meter. We need to calculate how many linear meters are needed for 65 m2. 
Our board (lining) has dimensions of 300 x 10 x 0.5 cm or 3m x 0.1m x 0.005m. We multiply the length by the width in meters and get the area of one board (0.3 m2):
3m x 0.1m = 0.3 m2
Now we will find out how many boards are needed for 65 m2. To do this, divide 65 m2 by the area of 1 board:
65: 0.3 = 216.67 or 217 boards (lining)
Our lining (board) is 3 meters long, which means we need to buy 651 linear meters.
217 x 3 = 651 m/p
It is generally accepted: “The kitchen is a kind of altar on which a woman every day, relatively speaking, sacrifices herself to the family.” And precisely for this very reason important reason The fair sex should cook in a spacious and comfortable kitchen, where you can accommodate everything that is necessary for this process. The design of the room also plays a significant role, but that’s a completely different story. Initially, you need to calculate the sizes of countertops and cabinets, and then choose a specific color and shape.
Before making a choice, in a store, every kitchen buyer should ask the seller a question: “What does your store include in the standard list of linear meter measurements and what exactly is the height of the standard?”
It represents a conventional unit of measurement for any kitchen with the most minimal set of certain elements, which includes a kitchen made of fiberboard without finishing, the minimum internal filling of cabinets, upper and lower cabinets with opening doors, one shelf, one countertop and a strip designed for hanging shelves. It happens that the minimum set also includes handles, a plinth and a plinth. This all ultimately means that a linear meter is the average price of one meter in length; it is used when actively calculating the cost of a particular custom-made product per meter. It is worth keeping in mind that the cost per linear meter does not include: plinth, lighting and wall panel, cornice, oven, sink and wall plinth.
Linear meter of kitchen– this is a conventional unit of measurement for a kitchen, which is the result of dividing the store price of a set by its length along the wall.
How to calculate a linear meter of a kitchen
After determining this question, you need to measure the length of your kitchen and decide on the height. Then everything can be calculated and the desired result obtained using a simple formula: multiply the length of your kitchen by a linear meter at a given height.
In order to avoid troubles and errors in measurements, it is easier to calculate the length of the kitchen using the baseboard. The calculations take the lowest version of the kitchen, which is up to 72 centimeters in length, as well as the largest parts of the room.
If the set is of non-standard sizes, then its length must be multiplied by the store cost of the quantity. Experts said that the price of any kitchen can decrease or increase if it is assembled differently.
Still, any kitchen is a very special, one might say, intimate place. After all, in kitchens things are sometimes said spontaneously that could never be said, for example, in an ordinary living room. Avid housewives will agree with this expression, and therefore for them the kitchen acts as a kind of sanctuary, where the sacrament of preparing various feasts and secret conversations takes place. The design and size of your headset should be comfortable for the first sacrament and conducive to an intimate conversation. Therefore, when choosing a kitchen, women care little about how much it costs per linear meter. The main thing is how many guests it can accommodate and how much space it needs for cooking. Both the customers themselves and the employees representing the corresponding store can calculate the linear meter.
Inexperienced or novice builders do not know how to calculate linear meters.
These parameters are used when performing repair or construction work, even upon purchase.
The calculation of a linear meter arises when it is necessary to facilitate the calculation of the quantity of products, for example, linoleum, curtains, and the like.
This concept is almost no different from the concept of length, only the width of the material is taken into account.
Most often, the width of a certain product or floor covering is considered a standard value and if it is necessary to calculate a linear meter, then they are not taken into account.
To calculate the linear meter of flooring for rooms, it is worth measuring its width and length.
Measurement Tools
To measure the width and length of a room, use a tool such as a tape measure, and if you don’t have a tape measure, you can use a regular measuring tape.
In order not to forget the results, it is best to write them down in a notebook or on a piece of paper, only then can you go shopping in the store. Having all the measurements, you can make a choice yourself or you can turn to sales consultants for help.
Example
For example, if the width of your corridor is two meters and its length is four meters, then you will need to buy four linear meters of flooring, which is two meters wide.
If the store does not have the width of flooring you need, you can purchase two linear meters of flooring whose width is four meters. But in this case, you will have to cut the material in half and cover the floor with two covering sheets.
- Take measurements very carefully and carefully, this is necessary so that there are no errors in the calculations. If the calculations for a linear meter of material are incorrect, then it will not be possible to return it to the store.
- For calculation required quantity flooring, all calculations can be done in square meters. For example, linoleum is made 1.5 - 4 meters wide.
- In stores or building materials markets or finishing materials indicate the cost per linear meter, this will not depend on the width of the building material.
Peculiarities
If, for example, when laying, it is permissible to join the material, then when laying carpet, it is not recommended to make joints. For this reason, when purchasing, it is necessary to purchase the required amount of linear meter of material.
The cost of the material will directly depend on its width and the greater the width, the higher the price of the material. To determine the amount you will have to pay for the material, you need to multiply the resulting quantity per linear meter by the price of one linear meter of the material.
Calculation of linear meter
For furniture
It is often necessary to calculate the linear meter for cabinet furniture.
If the furniture is made to order, this is necessary so that the furniture manufacturer can tell you the price of the furniture.
A linear meter is also necessary when purchasing ready-made furniture; with its help you can determine the number of cabinets and other necessary parts.
Cost calculation
After all, as you know, the services of specialists are very expensive. By making all the measurements yourself, you can save a lot. We hope that this information was useful to you. We wish you good luck!